Silver Travertine Sink
Solid one-piece integrated sink crafted from premium Iran Silver travertine. Features natural silver-grey layered texture with authentic porous travertine character, honed matte finish with holes-filled treatment for improved stain resistance. Seamless monolithic structure, pre-drilled faucet holes. Ideal for boutique hotels, luxury spas and wabi-sabi style villa bathrooms.
Item:Custom Solid Iran Travertine Integrated Basin Natural Texture for Bespoke Wabi-Sabi Bathrooms
Material: Silver Travertine, Iran Grey Travertine
Bathroom Sink Size:16'' x 24"x 10"( 40x60x25 cm) etc.
Thickness: 20,30mm
Surface: Polished, Honed, Brushed
MOQ: 100 Sets
Marble Brand: KA UNITED
Application: Marble Bathroom Vanity Tops For Private Home, Hotel, Villa, Apartment, or other commercial estate properties
Product Introduction
Quick Summary: The Silver Travertine Sink is a rectangular integrated bathroom basin made from natural Iranian silver travertine, distinguished by horizontal grey, taupe and beige mineral layers. Its recessed wash bowl, substantial front fascia and wall-mounted configuration are intended for residential and hospitality bathroom installations. The reference dimensions are 600 × 400 × 250 mm, with customizable faucet drilling, drain details and honed or half-polished finishing. Because travertine contains natural pores and the finished fixture carries considerable weight, buyers must confirm the stone treatment, drainage geometry and wall-support arrangement before approving production.
Silver Travertine Sinks for Villa Bathrooms, Boutique Hotels and Spa Vanity Projects

Rectangular silver travertine basin with a broad stone deck and recessed bowl.
The rectangular sink combines a horizontal stone deck, an inset washing bowl and a broad front face within one visually coordinated vanity form. Its wall-hung configuration makes it suitable for bathrooms where the sink itself is intended to remain visible rather than disappear inside a traditional cabinet.
Silver Grey Travertine Sinks work well with warm timber, light plaster, neutral porcelain, brushed metal and other materials commonly used in restrained contemporary bathrooms. The natural stone introduces horizontal grain and tonal variation without requiring a complicated basin silhouette.
At approximately 600 mm across its longer dimension, the reference model can be considered for a single-user vanity arrangement. The actual usability depends on the internal bowl dimensions, remaining deck width and the location of the selected faucet.
The design can also be adapted to different wall and plumbing arrangements, provided that the revised dimensions and support method are reviewed together.
Bathroom Applications and Project Suitability
Private Villa Bathrooms
A compact stone basin for master ensuites, guest bathrooms and private dressing areas where natural texture is part of the interior specification.
Boutique Hotels and Resorts
A distinctive washbasin for individual guest rooms or bathroom packages requiring coordinated dimensions, finish approval and repeatable plumbing layouts.
Private Spas and Wellness Suites
A natural-stone basin for treatment suites and private washing areas where material appearance and a defined cleaning routine are important.
For heavily used communal washrooms, the specification should also consider cleaning chemicals, impact exposure, fixture loading and maintenance frequency. Natural travertine may not be the preferred choice where aggressive chemical cleaning or minimal surface maintenance is required.
Iran Silver Travertine: Layered Grey, Taupe and Natural Stone Texture
Iran Silver Travertine has a notably layered appearance. In the supplied product photographs, narrow mineral bands run through the stone in silver grey, warm taupe, beige and deeper smoky-brown tones.
These bands are most apparent across the front of the basin and continue through the surrounding stone deck. The finish is relatively subdued rather than highly reflective, allowing the changes in mineral tone to remain visible under ordinary bathroom lighting.
Travertine is a carbonate-based sedimentary stone formed through mineral deposition. Its layered structure and natural cavities distinguish it from uniformly colored manufactured bathroom materials.
Some sections show closely spaced fine bands; others contain broader areas of grey or beige. Natural pores, small mineral marks and occasional filled cavities may also be visible depending on the selected stone and surface treatment.
Grey Travertine Basins made for the same bathroom project should be selected against an approved tonal range. Matching every mineral line between separate basins is neither realistic nor necessary, but significant differences in overall darkness or surface treatment should be reviewed before fabrication.

The natural layering, pore distribution and finish should be reviewed from actual product samples.
Why Vein Direction Matters on a Rectangular Stone Sink
A basin with straight sides and a broad front face makes horizontal mineral bands particularly visible. Before cutting, the stone orientation should be considered so that the main face has an intentional and balanced appearance.
The direction of the natural bedding, the position of cavities and the available stone dimensions also affect fabrication decisions. The most attractive cutting direction must still be compatible with the structural requirements of the finished basin.
Silver Travertine Rectangular Sink Dimensions and Technical Specifications
The reference unit measures approximately 600 mm across, 400 mm from front to back and 250 mm in overall body height. These are the external fixture dimensions, not the dimensions of the recessed washing bowl or its finished mounting height above the floor.
| Silver Travertine Sink - Product Specification | |
|---|---|
| Product Name | Iran Silver Travertine Rectangular Integrated Sink |
| Stone | Natural Silver Travertine |
| Origin | Iran, per supplied material specification |
| Reference Dimensions | 600 × 400 × 250 mm (Approx. 24" × 16" × 10") |
| Basin Configuration | Single Recessed Rectangular Wash Bowl |
| Mounting Type | Wall Mounted / Floating Installation |
| Surface Finish | Honed or Half-Polished / Satin Appearance, Subject to Sample Approval |
| Faucet Preparation | Deck-Mounted Faucet Holes; Quantity, Diameter and Spacing Customizable |
| Drainage | Standard-Type Drain Opening According to Approved Hardware Template |
| Overflow | Project-Specific, Subject to Construction and Plumbing Review |
| Surface Protection | Approved Pore Filling and Natural Stone Sealing as Applicable |
| Customization | Overall Size, Basin Cavity, Edge Treatment, Faucet Holes, Drain Position and Surface Finish |
| Installation Support | Engineered Concealed Frame or Suitable Structural Brackets |
External Dimensions Versus Usable Basin Size
The external 600 × 400 mm footprint includes the surrounding stone deck and the front, rear and side walls of the basin. It should not be interpreted as a 600 × 400 mm internal washing cavity.
When the bowl size is revised, the amount of stone remaining around its perimeter changes. This affects the available space for faucet holes, the distance between the drain and the rear support, and the strength of narrow stone sections.
Final shop drawings should identify the external dimensions, internal basin length and width, usable bowl depth, corner radii, stone wall thicknesses, drainage fall and faucet centerlines separately.
Integrated Travertine Sink Fabrication, Basin Cutting and Faucet Holes
The main fabrication task is to form an accurate rectangular wash bowl within a substantial stone vanity body. A successful result depends on the relationship between the cavity, surrounding deck, drain and required support-not simply on the external rectangular shape.
Silver Travertine Integrated Sinks may be fabricated from an appropriately selected solid stone section or produced using carefully matched, fabricated components, depending on the approved construction and available stock. Any actual joints, reinforcement or bonded components should be disclosed in the final fabrication drawing. A visually continuous surface does not, by itself, establish that the fixture contains no seams.

Recessed bowl geometry and rear-deck faucet drilling are key fabrication interfaces.
Basin Cavity and Drain Position
The interior requires a correctly positioned drain opening and a suitable fall toward that opening. Flat areas that retain standing water should be identified during the fabrication review.
The bowl corners require careful machining and finishing. Sharp internal transitions can complicate cleaning and may concentrate stress, so corner geometry should be selected with both appearance and fabrication practicality in mind.
Faucet Hole Configuration
The reference photographs show three openings across the rear deck, suitable for consideration with a compatible multi-hole faucet arrangement. Single-hole faucets or other approved layouts can be reviewed, but drilling positions must follow the selected tap manufacturer's template.
Faucet Reach, Splash Control and Overflow Options
The faucet spout must reach far enough into the bowl for comfortable washing without directing the water stream onto the front edge. A tap installed too close to the rear bowl wall may cause inconvenient splash patterns.
For wall-mounted faucets, the wall outlet height and horizontal spout projection must be coordinated with the finished stone position. Deck-mounted fixtures instead require sufficient clear stone around each drilled opening and room beneath the deck for mounting hardware.
An overflow should not be assumed to be included merely because a rectangular bowl is shown. Its feasibility depends on the internal stone construction, drain assembly and approved plumbing design.
Honed, Half-Polished and Pore-Filled Silver Travertine Finishes
The surface specification influences both the appearance of the stone and the cleaning requirements of the completed basin. The supplied description refers to a honed surface, while the product parameters also identify a half-polished finish. These terms should be resolved through an approved physical sample rather than treated as interchangeable.
Honed travertine generally has a smooth, low-reflection surface. A satin or half-polished appearance may show a somewhat different light reflection, depending on the finishing process and the selected stone.
Natural travertine contains voids formed during its geological development. Some cavities intersect the visible surface; others remain beneath it. Filling exposed holes can create a smoother washing surface, but the treatment does not remove every internal cavity or make the material permanently non-porous.
For a bathroom sink, filler selection deserves attention inside the bowl, around the drain, near faucet holes and along exposed edges. The filler color should also remain visually acceptable against the natural silver-grey bands.
| Finish Selection | Visual Result | Buyer Approval Requirement |
|---|---|---|
| Filled and Honed | Smooth, understated matte stone appearance | Approve filler color, pore visibility and finish uniformity |
| Filled and Half-Polished | Satin-like surface with controlled light reflection | Confirm the precise sheen against an approved sample |
| More Open-Pore Texture | More pronounced natural cavities and tactile surface variation | Review cleaning access and whether exposed pores are acceptable in wet areas |
Sealing and Bathroom Cleaning
Travertine is sensitive to acidic cleaning products. Vinegar, aggressive bathroom descalers and other acid-based chemicals may etch calcium-carbonate stone even when a penetrating sealer has been applied.
Routine cleaning should use a soft cloth or sponge with an appropriate pH-neutral natural-stone cleaner. Soap residue and water deposits should be removed regularly rather than allowed to accumulate around the drain or within exposed pores.
A suitable sealer can help reduce the absorption of certain liquids, but the frequency of maintenance depends on the selected stone, finishing treatment, cleaning products and actual use conditions.
Wall-Mounted Silver Travertine Basin Installation and Plumbing Coordination
Silver Travertine Vanity Sinks in a floating arrangement require suitable structural support. The weight of the finished stone fixture must not be transferred to decorative wall tiles, plasterboard or an unverified partition.
The installation designer should establish the actual finished weight, wall composition, support frame, brackets, anchor positions and expected service loads. These details determine whether the wall assembly can support the basin safely throughout use.

Wall support and plumbing interfaces require separate project-specific approval.
Structural Wall and Concealed Supports
A concealed metal frame or properly engineered support brackets may be required behind or beneath the stone. The actual method depends on the basin construction, final weight and wall structure.
Support locations must avoid conflict with the drain, faucet connections and other plumbing penetrations. Where reinforcement is concealed, maintenance access and future removal should also be considered.
Finished Mounting Height
The 250 mm reference dimension describes the body height, not the required mounting elevation. The top-of-basin height should be coordinated with the users, mirror, faucet, wall finishes and applicable local accessibility requirements.
Drain Connections and Wet-Area Protection
The specified drain opening must match the actual waste fitting. The installer should confirm trap clearance, connection accessibility, waterproofing around wall penetrations and the required seal between the rear stone face and adjacent wall finish.
The stone sealer is a surface treatment, not a substitute for the building's bathroom waterproofing system. A properly detailed wall installation must address any water path behind or beneath the basin.
For hotel fit-outs, the approved installation drawing should be shared with the plumbing contractor and wall-support installer before finished bathrooms are released for stone installation.
Natural Silver Travertine Basin Performance and Technical Selection
Travertine is a calcareous natural stone. Its suitability for a bathroom basin depends on the condition of the selected material, the finished geometry, surface treatment and correct installation. Generic rock-class characteristics should not be represented as laboratory results for this particular sink.
| Material Property | Relevant Behavior | Project Consideration |
|---|---|---|
| Stone Classification | Natural calcium-carbonate-based travertine | Specify stone-compatible surface treatment and cleaners |
| Natural Porosity | Mineral voids may appear at or beneath the exposed surface | Approve pore treatment, filler compatibility and maintenance |
| Acid Sensitivity | Acidic substances can etch the stone finish | Avoid acid-based bathroom cleaning chemicals |
| Water Absorption | Varies by stone selection and material condition | Use appropriate sealing and verify wet-area suitability |
| Structural Strength | No lot-specific strength values supplied | Confirm remaining stone sections and support design |
| Surface Finish | Honed and satin-like finishes have different reflection levels | Approve a representative finished sample |
For specifications requiring certified absorption, flexural strength or other laboratory performance figures, the relevant test results must be obtained for an appropriately identified stone source and testing method. No unverified numeric values have been assigned to this product.
Factory Inspection, Basin Fit Checks and Protective Packing
The inspection priorities for a rectangular stone washbasin differ from those for flat slabs or tiles. The finished basin has an internal cavity, a drainage opening, exposed edges and wall-support interfaces, each of which requires its own review.
Before release, dimensional checks should cover the external footprint, usable bowl geometry, stone wall thickness, drilled hole positions and the fit of the specified plumbing components.
The surface review should cover the approved color range, visible travertine pores, filler condition, finish uniformity and any vulnerable natural fissures. Drainage behavior should be assessed with the intended waste fitting or an appropriate test arrangement.
For multiple-room hospitality projects, representative units should be checked against the same approved drawings and finish samples. Numbered identification can help keep different faucet configurations or bathroom packages separate during delivery.
Export packing should protect the broad front face, upper perimeter, inside bowl corners and drilled openings. A support arrangement inside the shipping crate must prevent concentrated pressure on narrow stone sections during handling and transport.
Bathroom Design Reference: Silver Travertine with Natural Interior Finishes

Bathroom application reference for material coordination; final installation follows project drawings.
A wall-mounted silver travertine basin can be combined with pale plaster walls, medium-tone timber, warm brushed metal or muted porcelain surfaces.
In a compact bathroom, the floating position leaves floor space visible beneath the basin. In a larger ensuite, the stone can be coordinated with a wider vanity wall, mirrors and complementary wall cladding.
The purpose of the design reference is to demonstrate one way of coordinating the material within an interior. The basin specification remains independent of the illustrated room and can be adapted to other suitable bathroom layouts.
Silver Travertine Integrated Sink Compared with Four Related Travertine Basins
The compact silver travertine model has a wall-mounted rectangular form with a single recessed basin. Buyers considering a different bathroom configuration can compare it with longer floating vanities, stronger travertine colors or full-height pedestal basins.
| Product | Design Difference | Selection Consideration |
|---|---|---|
| Silver Travertine Sink | Compact rectangular integrated bowl with silver-grey mineral bands | Single-basin wall-mounted bathroom installation |
| Floating Travertine Sinks | Extended horizontal beige travertine vanity forms | Longer bathroom walls and single- or double-basin layouts |
| Red Travertine Vanity Sinks | Warm red and rust-colored travertine appearance | Bathrooms requiring a stronger natural stone color accent |
| Beige Travertine Pedestal Basins | Freestanding stone basin form in beige travertine | Projects preferring a floor-standing fixture rather than wall suspension |
| Roman Silver Travertine Vanity Basins | Vertically oriented pedestal basin with layered stone character | Bathrooms emphasizing a self-contained freestanding stone fixture |
Recommended Travertine Sinks and Natural Stone Vanity Basins from KA UNITED
Floating Travertine Sinks
Extended beige travertine floating vanities accommodate tailored basin layouts for larger residential and hospitality bathrooms.
View ProductRed Travertine Vanity Sinks
Rust-red travertine bathroom basins bring a stronger mineral color accent to contemporary and natural interiors.
View ProductBeige Travertine Pedestal Basins
Cream-beige freestanding travertine basins create an architectural bathroom fixture without a conventional vanity cabinet.
View ProductRoman Silver Travertine Vanity Basins
Layered Roman Silver travertine forms a tall freestanding basin suited to compact powder rooms and ensuites.
View ProductFrequently Asked Questions About Silver Travertine Sinks
1. What are the reference dimensions of this Silver Travertine Sink?
The reference external dimensions are 600 × 400 × 250 mm, approximately 24 × 16 × 10 inches. The recessed bowl dimensions, drain position and finished wall-mounting height must be confirmed separately through the approved production drawing.
2. Can the Silver Travertine Sink be mounted directly to a bathroom wall?
A wall-mounted installation requires structural verification. The completed basin must be supported by a suitable engineered frame, brackets or another approved support system. Decorative wall finishes and unverified lightweight partitions must not be relied upon to carry the stone fixture.
3. Can the faucet hole arrangement and basin drainage be customized?
Yes. Faucet hole quantity and spacing, drain location and basin geometry can be reviewed according to the selected plumbing fixtures and shop drawings. The proposed drilling must leave sufficient stone around openings and remain compatible with the finished basin construction.
4. What is the difference between honed and half-polished silver travertine?
Honed travertine generally has a smooth, matte appearance. Half-polished or satin-like finishes may reflect more light, depending on the processing method. The exact sheen, pore treatment and filler color should be confirmed with an approved finish sample before fabrication.
5. Does a filled and sealed travertine sink become completely waterproof?
No. Filling can close accessible surface cavities and sealing can reduce the absorption of certain liquids, but neither treatment makes natural travertine permanently non-porous or eliminates the need for appropriate bathroom waterproofing and maintenance.
6. Is every integrated travertine sink carved from one solid block without joints?
Not necessarily. The construction depends on the selected stone, available stock, cavity design and fabrication method. A basin may use a selected solid stone section or accurately matched components. Any joints, bonding or reinforcement must be identified in the approved construction details.
7. What information should a hotel contractor provide before ordering?
The contractor should provide the approved basin dimensions, bathroom layout, faucet and drain templates, finish sample requirements, installation height, wall structure and support details. Any required overflow arrangement, service access and project-specific acceptance criteria should also be established before production.
Final Silver Travertine Sink Procurement Check: Approve the Fixture and Installation as One Assembly
Before releasing a custom wall-mounted basin order, the purchaser should confirm that the stone fabrication drawing and the bathroom installation drawing describe the same assembly. A correct external stone dimension is not sufficient if the planned support brackets interfere with the trap or faucet connections.
For this reference design, the final release should identify the chosen material appearance, actual bowl dimensions, edge construction, faucet template, drain hardware, finish sample and installation support. These decisions must be resolved before cutting the selected stone, especially where multiple guest bathrooms use a common fixture specification.
Practical Takeaway: The Silver Travertine Sink should be purchased as a coordinated natural-stone bathroom fixture, with the finished bowl, plumbing interfaces, surface treatment and structural mounting details approved together. Specify the actual honed or satin finish by sample and verify the support system before installation.

Request Custom Silver Travertine Integrated Sinks for Your Bathroom Project
KA UNITED can review Silver Travertine Rectangle Sink configurations for private residential bathrooms, hotel guest suites and selected spa installations. The reference design has a compact wall-mounted rectangular body with a recessed washing bowl and natural Iranian silver-grey stone banding.
Send the required basin dimensions, faucet and drain specifications, preferred finish, wall construction details and destination. Where the project requires multiple coordinated bathrooms, include the bathroom schedule and approved shop drawings so that the stone fixtures can be evaluated against the same fabrication and installation requirements.
Hot Tags: silver travertine sink, China silver travertine sink suppliers, factory
You Might Also Like
Send Inquiry










