Maintenance skills of quartz table
Quartz stone countertop is now the net red material in the decoration industry and is deeply welcomed by the public. Although the quartz stone countertop is solid and durable, if we cherish it more when we use it, the service life of the quartz stone countertop will increase accordingly. Now let's talk about some precautions for the daily use of quartz table. We not only need a good table, but also need to know how to maintain and maintain it, so that the table can be in a healthy state at any time!
1. Although quartz stone is hard and hard, it is not easy to scratch, and the water absorption is only 0.02%, so it is not easy to penetrate. Because quartz stone is a die-casting artificial stone, the plate density can reach 2.3g/m3, and some manufacturers will do surface antifouling treatment. Do not scrape with sharp tools for a long time. Too deep scratches on the table will damage the protective layer and cause the problem of breeding bacteria.
2. Quartz stone plate is made of quartz sand, resin and a small amount of additives. Do not place hot pots and other heat capacitors for a long time, because the temperature of the heat capacitor is far more than 100 degrees. As a result, the table surface will crack due to heat expansion and cold contraction or leave the mark on the bottom of the container. If it needs to be placed, please use the heat insulation pad.
3. Prevent oil, salt, soy sauce, vinegar and other materials from spilling on the table. In case of spilling, it needs to be cleaned in time. Please use the cutting board to cut vegetables. The quartz stone has high hardness, which will produce scratches or blunt knife edges when cutting vegetables. If you accidentally leave a knife mark, according to the depth of the knife mark, gently wipe the surface with 180-400 mesh sandpaper and then treat it with a cleaning cloth.
4. When cleaning, do not use the iron wire ball to rub and clean back and forth, but use clean water. Neutral detergent or soapy water can be used for oil fume stains, which shall be wiped dry with a rag after cleaning. Quartzite should avoid contact with strong chemicals. The most common strong chemicals in the family are paint remover, metal cleaner, stove cleaner, methylene chloride, acetone (nail polish remover) and strong acid cleaning agent. If you are stained with the above chemicals, be sure to use a lot of soapy water to clean the table.
If the same products are used in different ways, there will be a certain gap in service life. Extending the service life of goods is inseparable from daily careful care and maintenance. The price of quartz stone is on the high side in the cabinet table materials, so you should read the operation manual carefully before use. Remember not to cut, chop and chop directly on the quartz stone plate, but also maintain it regularly.
